Which Electric Heater is good?

1. Fill the Electric Heater

Also known as oil-filled Electric Heater. The Electric Heater is equipped with a new heat-conducting oil. Switch on the power supply, the heat conduction oil around the electric heating tube is heated, and then the heat is dissipated along the heat pipe or loose parts. When the oil temperature reaches 85, its temperature control element will automatically power off. This heat-conducting oil for the Electric Heater does not need to be replaced and can be used for more than 5 years.

Advantages: oil filled Electric Heater heating, even in the case of sudden power failure, also maintain a certain temperature for a long time. At the same time will not produce harmful gas or electrical noise, relatively safe. And oil-filled radiator heater surface temperature is not too high, even if contact with the human body will not cause burns. Suitable for heating where human body may come into direct contact. Of course, if there are young children in the house, be careful not to go near the equipment. In addition to good cleaning and heating effects, oil Electric Heater is also suitable for bedrooms and bathrooms. Some products also come with a drying rack on the top, on which users can dry their clothes. In this case, rainy days are also practical.

2. halogen tube heating Electric Heater

Halogen tube is a kind of sealed luminescent heating pipe, the tube is filled with halogen element inert gas, can inhibit the evaporation of tungsten wire, prolong the service life of tungsten wire, so as to extend the service life of Electric Heater. There are two kinds of tungsten and wolframesin the middle, but the cost of tungsten is much higher than wolframesin the market, so it is not popular. At present, most of the halogen lamp tubes on the market are made of wolframite wire.

Halogen lamps have the advantages of high thermal efficiency, no oxidation when heating and long service life. And some models also have timing, rotation, humidification and other functions. Halogen tubes dissipate heat by emitting light. Generally,2 ~3 halogen tubes are used as a heating source, and the power consumption is about 900 ~ 1,200 W, which is suitable for the room with an area of about 12 square meters. Some advanced products have automatic power off, fall automatic shaking head function, simple and practical design.

Advantages: Halogen lamp has the advantages of high thermal efficiency, no oxidation when heating, long service life, etc. And some models also have timing, rotation, humidification and other functions. Halogen tube Electric Heater glow and heat dissipation. Generally, 2~3 halogen tubes are used as a heating source, and the power consumption is about 900~1200W, which is suitable for the room with an area of about 12 square meters. Now some advanced products have automatic power off, automatic shaking function, simple and practical design.

3. Electric Heater

The heater with electric heating wire as heating material is mainly more and more traditional heaters on the market. Its heating body is electric heating wire, and the heat generated by the electric heating wire is blown out by b. Like an electric fan, this heater can automatically rotate the Angle to heat the whole room, which is suitable for small rooms less than 8 square meters. The new product also has ultrasonic humidification, release of oxygen-carrying anion, wide spectrum and other functions. The disadvantage is that the temperature drops fast after shutdown, the heating range is small, the oxygen consumption, the electric heating wire is easy to break for a long time. Because the electric heating wire itself is cheap, the line body is broken, and the maintenance will not be too heavy. Generally, the power consumption is about 800~1000W.

Advantages: Automatic rotation Angle, some new products with ultrasonic humidification, release of oxygen-carrying negative ions, spectrum width and other functions. Electric heating wire Electric Heater durable, not easy to aging, hot spot diffusion to the entire surface of Electric Heater, heating evenly; Stepless temperature control, precise temperature control, low power consumption, energy saving

4. Carbon fiber Electric Heater

Carbon fiber Electric Heater is a tubular Electric Heater made of carbon fiber as the basic heating material. Integral straight tube type and rectangular floor type: straight through type generally adopts single tube heating, the body can automatically rotate, heating the whole room. play

After turning on the power supply, the temperature rises quickly, and the body feels hot within 1~2 seconds. 5 seconds surface temperature can reach 300-700 degrees, power can be adjusted in 600~1200W, rectangular floor type with double tube heating, can be used on the floor or wall, the power is relatively large, about 1800~2000W W. In addition to heating, such products can also be used for health care and physiotherapy. The Electric Heater can produce 765.9W/M infrared radiation when heated, which is equivalent to a spectrum therapy instrument.

Advantages: rapid heating, convenient installation, good health physiotherapy effect.